Omni Algae Terminator (1 Qt)

Omni Algae Terminator (1 Qt)

  • $ 27.99


Omni Algae Terminator is highly effective, patented and non-staining algaecide that kills and control all types of swimming pool algae. This product is especially recommended for killing and controlling green, black, spot algae and mustard algae growths. This versatile algaecide can be used in swimming pools sanitized with chlorine or bromine and in swimming pools of all surface and filter types. Algae Terminator is highly concentrated. It woks fast to kill algae and keep your pool looking great. 

Product Dosage:

Initial Application:

8 fl oz per 10,000 gallons of water

Routine Maintenance:

1.5 fl oz per 10,000 gallons of water

Directions:

Prior to application: 

1. Ensure all equipment is working properly

2. If necessary, clean the filter system

3. Adjust pH between 7.2-7.6

4. Establish and maintain proper chlorine and bromine levels

5. In chlorine-treated pools, add stabilizer to establish a minimum level of 30-40 ppm of cya to reduce the degrading effects of sunlight or chlorine residual

6. Vacuum leaves and any other foreign debris from pool

7. Brush visible algae thoroughly from the swimming pool surface with a surface-compatible brush

Algae Prevention:

1. Initially apply 8 oz of this product per 10,000 gallons of pool water with pump and filter operating

2. Thereafter, for weekly application intervals, add 1.5 oz of Algae Terminator per 10,000 gallons of pool water

3. For 2 week application intervals, add 3 oz per 10,000 gallons of pool water every other week

4. Apply more often if pool volume is diluted of heavy rain, frequent backwashing or partial drain/refill

5. Wait at least 15 minutes after application before entering pool 

Algae Treatment:

1. Add alb of Breakout Extra per 10,000 gallons of pool water with pump and filter operating

2. Allow to circulate for 1 hour

3. With pump and filter operating, apply 16oz of Algae Terminator per 10,000 gallons of pool water directly to areas with heavy algae growth

4. Continuously circulate pool water for 24 hours

5. The next day, thoroughly brush pool surfaces

6. In case of persistent algae, repeat brushing and application after 2-4 days

7. The use of a filter aid will enhance filter efficiency and algae removal

Ingredients:

Metallic Copper 3.3%, Other Ingredients 96.7