Omni pH Decreaser (8 lb)

Omni pH Decreaser (8 lb)

  • $ 15.99


Omni pH Decreaser will slowly lower the pH level of your swimming pool if the pH gets too high. Keeping your swimming pool's pH level balanced is important for swimmer comfort and it also helps prolong the life of your swimming pools equipment. In addition, many algaecides require the pH to be balanced in order to work properly. A great feature of this product is that it is a granular chemical. This means it is safer to handle and use than liquid acids such as muriatic (hydrochloric) or sulfuric.

Product Dosage:

pH 7.8 to 8.0 3/4 lb per 10,000 gallons of water

pH 8.1 to 8.4 1 1/4 lb per 10,000 gallons of water

pH above 8.4 1 1/2 lb per 10,000 gallons of water

Directions:

1. Balance your swimming pool's total alkalinity to 80-125 for plaster finishes and 125-150 for vinyl, fiberglass and other non-masonry finishes

2. For most efficient performance of swimming pool chlorine, pH should be maintained between 7.2-7.6

3. Use a reliable test kit to determine pH level

4. If the test shows a pH above 7.6 add this product to pool per the dosage listing below

Treatment:

1. To Omni pH Decreaser, broadcast into deep end of the swimming pool when not in use

2. Add directly to the pool with pump and filter running

3. Never add more than 1.5 lb of this product per 10,000 gallons of water at any one time

4. Allow pool water to recirculate 2 hours and retest pH

5. Repeat treatment as necessary

6. Newly plastered swimming pools may require frequent treatments for the first few weeks while the swimming pool is 'curing'

7. Do not add near metal fittings or allow pH to drop below 7.2

8. Do not allow undissolved lumps to remain on the bottom of your swimming pool

9. These can be broken up by brushing the undissolved product dispersing throughout the pool